Coffee Sketcher

Dry milling

Properties3
descriptionThe last thing that happens to coffee before it leaves the country — a shed full of machines cracks the dried shell off the seed, then sizes, weighs, photographs and hand-picks the beans until what is left is clean enough to sell. Every processing method, from natural to washed, ends here.
tagsconcept, processing, grading
aliasesHulling, Hulled, Dry mill, Dry milling of coffee, Hulling and dry milling, Milling, Curing, Threshing, Threshing station, Polishing, Screen grading, Size grading, Density sorting

14 min read

Dry milling

Dry milling is everything that happens to coffee after it has been dried and before it is put in a bag for export. The centrepiece is hulling — cracking off the hard, dead outer layers so the green seed comes out — and everything around it is sorting: by size, by weight, by colour, and finally by eye.

Wikipedia’s coffee production article puts the whole job in one sentence: “The final steps in coffee processing involve removing the last layers of dry skin and remaining fruit residue from the now-dry coffee, and cleaning and sorting it” (confirmed via WebFetch 2026-07-23).

The name is a little misleading. Dry milling is not a processing method — it is not an alternative to washed or natural. It is the shared ending. A washed coffee, a natural, a honey and a pulped natural all arrive at the same shed and go through the same machines. What changes is only how much dead material has to come off.

The confusing sibling is wet milling, which is the opposite end of the timeline: the wet mill is the washing station where cherry is pulped and fermented within hours of picking. Wet milling happens at the start, dry milling at the finish, and a coffee usually spends weeks or months drying and resting in between.

What actually comes off

Hulling removes different things depending on what the farm did months earlier. This is the clearest statement of it, from Wikipedia:

“The first step in dry milling is the removal of what is left of the fruit from the bean, whether it is the crumbly parchment skin of wet-processed coffee, the parchment skin and dried mucilage of semi-dry-processed coffee, or the entire dry, leathery fruit covering of the dry-processed coffee.” (confirmed via WebFetch 2026-07-23)

What arrived at the millWhat hulling takes off
Washed — dried parchment coffeeThe papery parchment shell only
Honey / pulped naturalParchment plus the dried, glassy mucilage stuck to it
Natural — whole dried cherriesThe entire husk in one pass: skin, dried pulp, mucilage and parchment together

Two more words worth knowing before the machines start:

  • Parchment (botanically the endocarp) is the thin, brittle, papery shell wrapped directly around the coffee seed. A washed coffee is stored and shipped inland as “parchment coffee” and only loses that shell at the dry mill — because the parchment protects the seed in storage.
  • Silverskin is the even thinner membrane underneath the parchment, fused to the bean itself and tucked into its centre crease. Hulling does not fully remove it. A separate optional step does.

The National Coffee Association describes both halves of the same split — that in natural process “the entire dried husk, including the outer layer, pulp, and parchment” comes off, while in washed coffee “the papery inner parchment is removed” after drying (NCA, confirmed via WebFetch 2026-07-23).

The eight stations

A modern dry mill is a line of machines, each one throwing away a different kind of bad bean. Two independently fetched sources — a specialty-process reference and an Ethiopian exporter’s technical guide — describe the same sequence in the same order:

1. Pre-cleaning. Before anything mechanical touches the coffee, sticks, stones, string, nails and dust are pulled out. Ethiopian mills use “a pneumatic separator (airstream) that lifts loose dust, fiber, and broken parchment” (Ethio Coffee, confirmed via WebFetch 2026-07-23). This step exists to protect the hulling machine as much as the coffee.

2. Hulling. The shell is cracked and rubbed off by “a disc huller or drum huller, which uses friction and impact to crack and abrade the outer shell” (Coffeester, confirmed via WebFetch 2026-07-23). Wikipedia notes the machinery spans everything “from simple millstones to sophisticated” hullers (confirmed via WebFetch 2026-07-23). What comes out the far side is green coffee — “the raw, unroasted seed ready for further sorting” (Coffeester).

3. Polishing (optional). Friction rollers scrub off the silverskin left clinging to the bean. Wikipedia gives the reason plainly: “This is done to improve the appearance of green coffee beans and eliminate a byproduct of roasting called chaff” (confirmed via WebFetch 2026-07-23). It is cosmetic, it is done for markets that want a uniform-looking bean, and it costs a little weight.

4. Size grading. The coffee runs over stacked vibrating screens — “beans fall through successive screens until they reach a screen small enough to retain them” (Ethio Coffee, confirmed via WebFetch 2026-07-23). Screen numbers are measured in sixty-fourths of an inch (Coffeester, confirmed via WebFetch 2026-07-23), so “screen 18” means a bean too big to fall through an 18/64-inch hole. A screen number on a bag is a statement about bean size, not bean quality — though the two correlate enough that most origins price them together.

5. Density sorting. Sized beans go onto a gravity table, described by Coffeester as “a vibrating, slightly inclined deck” and by Wikipedia as a machine that “shakes the sized beans on a tilted table, so that the heaviest, densest and best vibrate to one side of the pulsating table, and the lightest to the other” (both confirmed via WebFetch 2026-07-23). This is where hollow beans, insect-bored beans and underdeveloped beans leave, because damage and immaturity both show up as missing mass.

6. Colour sorting. Optical sorters photograph every bean in flight and blow the wrong-coloured ones sideways with a puff of air, using “high-resolution cameras and, in advanced units, near-infrared (NIR) sensors” (Coffeester, confirmed via WebFetch 2026-07-23). This catches blacks, sours and ferment-damaged beans that weigh the right amount.

7. Hand sorting. People on illuminated tables or a conveyor “visually inspect every bean” (Coffeester; Ethio Coffee, both confirmed via WebFetch 2026-07-23). Wikipedia is blunt that at the top of the market this is not a fallback but the standard: “With most high-quality coffees color sorting is done in the simplest possible way: by hand” (confirmed via WebFetch 2026-07-23).

8. Bagging. The finished green coffee is weighed into export bags, “sewn, stacked, and held in a temperature-controlled warehouse” (Ethio Coffee, confirmed via WebFetch 2026-07-23) until it ships.

Grading sits on top of all of this rather than being a ninth machine. Wikipedia’s definition: “Grading is the process of categorizing coffee beans by various criteria such as size of the bean, where and at what altitude it was grown, how it was prepared and picked, and how good it tastes” (confirmed via WebFetch 2026-07-23). Steps 4 to 7 generate the physical evidence; the grade name is the label put on it.

Moisture: the number that decides when milling can start

Coffee cannot be hulled until it is dry, and it cannot be stored if it is too wet — mould and staling both start above roughly 12–13%. Every source consulted agrees on the principle and none agree on the number.

SourceFigure given
ISIC — coffee industry scientific bodyMaximum 12.5% before storage, for washed and natural alike
NCA — US National Coffee AssociationDried “to approximately 11% moisture to properly prepare them for storage”
Wikipedia — Coffee productionApproximately 10% water content before stability and distribution
CoffeesterOptimal window at hulling “generally cited as 11–12%“
Ethio CoffeeWashed parchment arrives at 11.0–12.5%; export range 10.5–12.5%

All five confirmed via WebFetch 2026-07-23.

The honest reading: somewhere between 10% and 12.5%, with 11% the most commonly repeated single figure and 12.5% the ceiling nobody wants to cross. Read alongside this wiki’s Washed process note, which records the same spread from the drying side — and the underlying reason from Cafe Imports, that below about 11% microbes can no longer work, which is precisely why that band is the target.

To verify

No standards body publishes a binding number. The Specialty Coffee Association’s green coffee standard — SCA-110 Green Coffee: Grading, Specifications, and Test Methods — is still listed under “Standards in Development” on the association’s own page and is not published (SCA, confirmed via WebFetch 2026-07-23). So the moisture figures above, and the screen numbers below, are trade convention and national rules rather than a single global specification. Anyone quoting “the SCA moisture limit” for green coffee is quoting something that does not yet exist.

Who owns the mill

This is the part that matters commercially, and the two fetched sources agree on the shape of it. Coffeester: “Dry milling is typically carried out at a dedicated dry mill (also called a hulling or threshing station), which may be located on a large estate, at a cooperative, or at an exporter’s central facility” (confirmed via WebFetch 2026-07-23). Ethio Coffee reports Ethiopian mills as “owned by a mix of private exporters and cooperative unions” and concentrated “on the outskirts of Addis Ababa” (confirmed via WebFetch 2026-07-23).

Three ownership models, three very different consequences for a smallholder:

  • The estate mill. A farm large enough to own its own huller controls the last step and can keep a lot separate right up to the bag. This is the normal arrangement behind competition lots — Daterra in Cerrado Mineiro and the Panamanian estates around Best of Panama all mill their own.
  • The cooperative mill. Members deliver parchment and the co-op mills and markets it. Traceability survives only as far as the co-op’s record-keeping allows.
  • The exporter’s central mill. One facility mills for many producers. This is the highest-capacity and lowest-cost option, and the one where a small farmer’s coffee most easily becomes indistinguishable from everyone else’s. It is also why vertically integrated traders such as Sucafina and origin exporters such as Daye Bensa treat milling capacity as a competitive asset, not a service they buy in.

The pattern is the same one this wiki’s Washed process note records for washing stations: in origins built on small farms, the shared facility rather than the farm is the real unit of quality. Dry milling is the second such chokepoint, and it comes after the coffee has already left the farmer’s control.

To verify

The Ethiopian grade thresholds. Ethio Coffee gives specific screen-to-grade mappings — “beans retained on size 14 and above are generally considered specialty grade,” size 18+ trading as G1, screens 14–15 as G2–G3 (confirmed via WebFetch 2026-07-23). This is a single commercial exporter’s guide, not a government document. Ethiopian grades are set by state machinery — the Ethiopian Coffee and Tea Authority and the Ethiopia Commodity Exchange — and this wiki’s ECTA note already warns that the Authority publishes far less per-grade detail than trade sources imply. Treat these thresholds as one exporter’s working summary until an ECTA or ECX schedule is read directly.

To verify

“Peaberries are 10–15% of any harvest.” Coffeester states this while describing screen grading (confirmed via WebFetch 2026-07-23). A peaberry is a cherry that grew one round seed instead of two flat ones, and it is separated at the screening stage because its shape will not behave like a normal bean. No second source consulted gives a share, the figure sits well above the ~5% commonly repeated elsewhere in the trade, and no agronomic study was read. Treat 10–15% as one reference site’s number, not a measured rate. See Peaberry.

Why it matters

Dry milling is where quality stops being created and starts being defended. Nothing in the shed makes a coffee taste better than the cherry allowed. Every machine in the line does one thing: throw away beans that would drag the cup down.

  • It is what a defect count actually measures. This wiki’s Fine Robusta note records CQI’s rule that a lot must have zero primary defects in 350 g — no full blacks, no insect-bored beans, no stones. Zero. That number is not a farming outcome; it is a milling outcome. The gravity table, the optical sorter and the hand table are the only reason it is achievable at all, which is why the Fine Robusta note frames the standard as an argument about mill investment as much as about taste.
  • It is the last chance to keep a lot separate. A competition lot is worth its price because it is that farm, that picking, that fermentation. Running it through a shared mill after a commodity lot without a full clean-down mixes the two. Micro-lot traceability lives or dies at the huller, not on the farm.
  • It is the step Robusta mostly does not get. Almost all Robusta is dried whole as a natural and milled cheaply at volume — which is exactly why hitting specialty defect standards is so hard for the species, and why origin-level programmes rather than individual farms drive Fine Robusta.
  • It is where “screen 18 Geisha” comes from. The size, density and defect language on a specialty bag — screen numbers, grade names, defect counts — is generated here. Cup score is decided by cupping; everything else on the label is decided by the mill.
  • Indonesia does it differently, on purpose. Wet hulling (giling basah) strips the parchment off while the coffee is still far wetter than normal, producing the distinctive earthy, low-acid Sumatran profile. It is the one place where hulling is a flavour decision rather than a cleaning step, and it is the reason this note’s “milling is not a processing method” rule has an exception.

To verify

Nobody consulted here has published what milling does to a cup score. The research behind this note found no primary cupping data isolating the effect of specific milling choices — polished versus unpolished, one density recipe versus another — and no Best of Panama or Cup of Excellence lot sheet tying a named huller, mill or sorting recipe to a score, price or buyer. Competition records publish farm, variety, altitude and process; they do not publish mill parameters. Any claim that a particular hulling or polishing choice raised a score is, on the evidence available, unsupported. The trade reason is simple: those recipes are proprietary to the mill.

Sources

  1. Specialty Coffee Association — Coffee Standards — the trade’s standards body; SCA-110 green coffee grading confirmed as still “in development,” not published; confirmed via WebFetch — accessed 2026-07-23
  2. ISIC (institute for scientific information on coffee) — Initial coffee bean processing — industry scientific body; 12.5% storage ceiling, silo storage, and “hulled to remove the parchment, and cleaned, screened, sorted and graded” confirmed via WebFetch — accessed 2026-07-23
  3. National Coffee Association USA — Coffee processing — US industry association; the natural-vs-washed split of what hulling removes, and the ~11% moisture target, confirmed via WebFetch — accessed 2026-07-23
  4. Wikipedia — Coffee production — source of the hulling, polishing, gravity separator, hand-sorting and grading definitions quoted above; confirmed via WebFetch — accessed 2026-07-23
  5. Coffeester — Milling, Sorting & Grading Green Coffee — disc/drum hullers, 1/64-inch screens, gravity tables, NIR optical sorters, the 11–12% hulling window, mill ownership models and the disputed peaberry share; confirmed via WebFetch — accessed 2026-07-23
  6. Ethio Coffee — Ethiopian Coffee Dry Milling: Export Preparation Guide — commercial exporter; the eight-stage sequence, pneumatic pre-cleaning, moisture ranges and the flagged Ethiopian grade thresholds; confirmed via WebFetch — accessed 2026-07-23
  7. Counter Culture Coffee — Coffee Basics: Processing — roaster; cited in the research report for the dry-mill finishing step, and already confirmed via WebFetch for this wiki’s Washed process and Natural process notes — accessed 2026-07-23
  8. Wiki Coffee — Coffee Milling — cited in the research report, not independently fetched — accessed 2026-07-23
  9. World Bank — Coffee agronomy and processing (FAU14) — cited in the research report for the historical framing of the dry method, not independently fetched — accessed 2026-07-23
  10. Sweet Maria’s library — Processing and Drying of Coffee: A Review (PDF) — cited in the research report for drying and flavour formation, not independently fetched — accessed 2026-07-23

Graph View

Backlinks